SPECIALTYTRAILERSUPPLIES

The beauty of todays homes is the diversity of designs and materials used for stairways, room openings and doorways. Because of this, the installation of child safety gates can be difficult since a one size fits all gate design does not exist. In the Stairway Gate Installation Kit (Model K12), KidCo has assembled the materials and fasteners necessary to properly install any child safety gate to stairway banisters, without drilling into your expensive, decorative wood. One kit is required for each side of the gate that is being mounted to a banister; and only the most basic tools are needed to assemble any good child safety gate. For use at the top or bottom of stairs with hardware or pressure mount gates. The hardware is designed to fit square posts 2 1/2in - 3 5/8in wide or use the included insert for round post installation. FOR ADDITIONAL QUESTIONS BEFORE PLACING YOUR ORDER PLEASE CONTACT KIDCO AT 1-800-553-5529

Make the installation of safety gates quick and easy. For any safety gates that are not being mounted in a wooden doorway frame, you need a kit such as this. It includes all the materials and fasteners needed to safely and properly install a gate to banisters, hollow walls or wrought iron. More than one kit may be necessary, as is usually the case with wrought iron. Safety gate sold separately.

This handy gate installation kit makes it possible to mount a metal KidCo Safety Gate on a variety of different structures and surfaces around the house. The kit is well equipped and comes with everything you will need (except tools) to attach a KidCo Safety Gate to wood banisters, wrought iron banisters, and hollow walls. The step-by-step instructions are easy to follow and include pictures and illustrations that will come in handy during installation. Depending on the type of surface the gate will be mounted on, adult installers can choose to install a gate with either wood screws or plastic ties. Along with wood screws, a wing nut, washer, toggle bolt, and plastic ties, the kit includes a 33-inch-long piece of pine wood and a pine wood spacer for installations on walls with molding at the base. Mounting a KidCo Safety Gate on a wrought iron banister requires two gate installation kits for each side of the gate. Additional tools, including a drill and screwdriver, are required to install a gate properly. --Chris Burns

The FloJet Model BW1000A Bottled Water Dispensing System is designed to pump water from commercially available 3, 5, or 6 gallon water bottles. The system delivers the bottled water under pressure to a sink mounted drinking water faucet, or to the water inlet of a refrigerator, icemaker, coffee brewer, or Jupiter Water Ionizer. The suction wand, when inserted into the water bottle, activates the float switch on the pump. This float switch also shuts off the system when the bottle is empty. The wand has a built in back-flow valve to prevent water from flowing back into the bottle. Universal seal cap most containers - Fits 3, 5, and 6 gallon plastic water bottles Suction wand and hose assembly Float switch for automatic shut-off when bottle is empty. Built-in check valve to prevent back flow Pump module with On/Off switch Installation and maintenance instructions Compact size for easy traveling

The Door Guardian Sliding Patio Door Lock is an elegant solution to sliding patio door security and safety. It was designed to replace the piece of wood, hcokey stick or broom you normally find in the bottom track of your slding patio door and is more attractive than a pin lock or charlie bar. It mounts easily to the upper track of most vinyl,wood and aluminum sliders. There is no drilling required , just run 2 screws into a keeper plate provided and then into the upper track. A 3" ventilation position is provided. Out of reach for children the Door Guardian Patio Door Lock was evaluated by National Safe Kids Washington, DC as one of the best childproofing devices for Patio Doors. All hardware and easy to follow instructions are included.

3 Button Compatible Remote With Docking Station, Transmitter With Key Ring, Compatible With Genie Garage Door Operators.

Increase security and privacy in your home by replacing interior and exterior doors without damaging the jamb or door frame with the Entry and Interior Door Mortise Kits from Milescraft.Each kit features an easy to use drop-in template design. Sturdy steel frame adjusts from 1-3/8" to 1-3/4" doors and jambs. Centered tabs on each template ensure complete accuracy Includes a durable carbide tipped 1/2" router bit with ball bearing eliminating the need for guide bushings. Includes Easy Measure Guide to simplify standard industry placement of your door hardware. Complete Mortise Kit includes templates for 2-1/2", 3", 3-1/2", 4" and 4-1/2" hinges; 1-1/8" x 2-3/4", 1-1/2" x 2-1/4", and 1-1/2" x 2-3/4" strike plates; and latch Plate Mortises: 1" x 2-1/4". 1-1/8" x 2-1/4", and 1-1/8" x 2-3/4" latch plates.

Kit contains: diamond-tipped pencil, ferrule removal tool, 20X magnifier, septum removal tool, and a refillable 59.1mL (2oz.) bottle of Snoop leak detecting solution. (Agilent 430-2000)

Raindance wallbar corner mounting kit

500' Network Cable Kit

DOUBLE ISO DIN INSTALLATION KIT FOR 1992 & UP GM

A New Solution for your computer experience - WinTouch WinTouch with USB interface can fully support any TFT LCD monitor and make it become touch-able, enabling user to enjoy the operation of a touch screen computer . Features: * Touch package software can help you adjust the function of WinTouch * USB 2.0 interface * Easy use and install , just plug and play Specification: SPACER - Patented technology LCD SIZE - 18.5" (16:9) VIEWABLE AREA - 16 3/8 x 9 3/8" (416.40 X 237.00 mm) ACTIVE AREA - 16 1/8 x 9 1/8" (411.00 X 231.60 mm) TRANSMITTAL - 82% ± 5% Surface Hardness - 3H (JIS K5400) TOUCH RESOLUTION - 4096 x 4096 INTERFACE CONTROLLER - External controllers: USB port OPERATING SYSTEMS - Windows XP, 2000,VISTA,Windows7 HID MODE - Digitizer HID-Vista or Windows7 / Mouse HID ACTIVATION FORCE - 50g RESPONSE TIME - 10 msec maximum. POSITION ACCURACY - 3 mm maximum error. OPERATING TEMPERATURE - -10°C to +60°C STORAGE TEMPERATURE - -40°C to +75°C HUMIDITY - Pass 40 degrees C, 95% RH for 96 hours. DURABILITY - Finger Touch :35M touches / Pen Hitting :10M touches Package Contents: - Touch Panel - USB Cable - Touch Pen - CD - Includes driver, English Manual and user guide

8 gauge amplifier installation kit, Competition high-quality fuse holder, Ring terminals: #10, 0.25-inch, 0.31-inch. Twenty 4-inch wire ties. Many feet of wire and cable: red power, black ground, blue turn-on, speaker wire

20ft 4 Gauge Clear Red Power Wire 4ft 4 Gauge Clear Black Ground Wire 20ft 16 Gauge Blue Remote Turn-on 20ft 12 Gauge Speaker Wire 20ft Right Angle RCA Interconnect Audio Cable 6ft Black Split Loom Cable Conduit AGU Type 60A Gold Plated Fuse Water Resistant In-line Fuse Holder 2 Ring Terminals: 4 G 2 Spade Terminals: 4 G 5 Spade Terminals: 14-16 G 3 Butt Connectors 20 Cable Ties 1 Black Grommet