SPECIALTYTRAILERSUPPLIES

The SunCalc is a revolutionary new electronic solar radiation measuring device that accurately measures sunlight.

This is a brand new digital 4 in 1 soil moisture and and light tester. It is great to measure growing conditions for all kinds of plants indoors and outdoors. It can be especially useful in lawn care in determining the soil conditions in different areas of your garden and finding the correct grass seed.

Fixes most light sets in seconds by addressing the damaged bulb at the plug or at bulb socket. LED headlight helps visibility in light repair. Audible continuity detector traces the circuit to the point of interruption. 3 way bulb puller easily helps tigh

The newly released Sinometer Luxmeter LX1330B is a lux meter with wide measuring range and lots of nice features. A luxmeter is used for checking the level of illuminance, the light falling on a surface, It is defined as: 'the density of the luminous flux incident on a surface'. It is the quotient of the luminous flux by the area of the surface when the latter is uniformly illuminated. - (E = df / dA). This convenient gadget is widely used in many areas such as construction, inspection, photography, greenhouse gardening and etc. The LX1330B can measure from 0 up to 200,000 lux, you can switch the units between lux and footcandle by simply pressing a button. It's powered by a 9V battery, which last for 200 hours or even longer. Other nice features include data hold, auto zero and more. Specifications: Power: 9V x 1, Ranges: 0-200/2,000/20,000/200,000 Lux , Accuracy: ±3% ±10 digits (±5% ±10 digits as over 20,000Lux), Repeatability: ±2%, Temperature Characteristic: ±0.1%C , Photo detector type: Silicon Photo Diode with Filter , Operating temperature: 32-104 degrees F (0-40 degrees C), Sampling rate: 2-3 times per second, Battery life: 200 hours (estimate), What's in the box: Mastech Luxmeter LX1330B, Carrying case, 9V battery, User manual.

The Sinometer luxmeter LX1010B can measure up to 50,000 lux, approximately 5,000 footcandles. It's used for checking the level of luminance, luminance is a measure of the amount of light falling on a surface. It is defined as: 'the density of the luminous flux incident on a surface'. It is the quotient of the luminous flux by the area of the surface when the latter is uniformly illuminated. - (E = df / dA). This convenient gadget is widely used in many areas such as construction, inspection, photography and etc. 9V battery and user manual included

Products trademarked HQRP™ are marketed and sold exclusively by Osprey-Talon. Specifications: Display: 3 1/2 digits LCD display, maximum Ranges: - 1-100,000 Lux.(3 Ranges), - 20,000 Lux range: reading x 10, - 100,000 Lux range: reading x 100, Resolution: 1 Lux; Accuracy: - < 10,000 Lux: ± 4% rdg ± 0.5 f.s - >10,000 Lux: ± 5 + 10 digits(Calibrated to standard incandescent lamp at color temperature 2856K) Repeatability: ± 2%; Temperature Characteristic: ± 0.1%/°C; Test rate: 0.2 times/sec; Photo detector: one silicon photo diode with filter; Operation temperature-humidity: 0°C to 40°C (32°F-104°F) 0-70% Rh; Storage temperature-humidity: -10°C to 50°C (14°F-122°F) 0-80% Rh Over-input: - Indication of " 1" (2,000 Lux/20,000 Lux), - Indication of "OVER" (100,000 Lux).

L-com's MICROPULSE? Fiber Optic Light Source eases the difficulty of tracing fiber optic cable runs by using innovative MICROPULSE? technology. Presently, to trace multimode terminated fiber runs, two types of equipment can be used. The first, a laser source, is expensive and dangerous to one's eyesight if viewed directly. The second method is to use an incandescent light source (flashlight) with a coupler to connect to the fiber optic termination. These devices produce a low intensity light signal, which is difficult to see by the human eye. L-com's solution to this problem was simple: Produce a low cost, high intensity light source that is safe to use and easy for the eye to locate. This was done by creating exclusive circuitry that produces an extremely bright red light source that is pulsed in an on-off manner that is easy for the eye to locate. A multi-use coupler is also utilized to support ST, SC, FC, RSD and FSD connections without additional coupling adapters or cables. Order online today! This is L-com part number DXL10.

L-com's MICROPULSE? Fiber Optic Light Source eases the difficulty of tracing fiber optic cable runs by using innovative MICROPULSE? technology. Presently, to trace multimode terminated fiber runs, two types of equipment can be used. The first, a laser source, is expensive and dangerous to one's eyesight if viewed directly. The second method is to use an incandescent light source (flashlight) with a coupler to connect to the fiber optic termination. These devices produce a low intensity light signal, which is difficult to see by the human eye. L-com's solution to this problem was simple: Produce a low cost, high intensity light source that is safe to use and easy for the eye to locate. This was done by creating exclusive circuitry that produces an extremely bright red light source that is pulsed in an on-off manner that is easy for the eye to locate. A multi-use coupler is also utilized to support ST, SC, FC, RSD and FSD connections without additional coupling adapters or cables. Order online today! This is L-com part number DXL10K1.

Change bulbs without a ladder. Pole extends to six feet in height. Fast, safe, easy.

OEM is a leading brand of automotive specialty tools.

Manufacturer Specifications Analyzing Method: Breath Test Sensor: Advanced semiconductor oxide alcohol sensor Screen: LCD Display for Time/Timer Alcohol Reading: 3 LED Light - Green, Yellow, Red Range: 0.00~0.19 BAC & 0.0~1.9g/l Alert Mode: Safe: Green LED Light - 0.0% ~ .02% BAC Caution: Yellow LED Light - .02% ~ .05% BAC Danger: Yellow and Red LED Light - equal or over .05% BAC Power Source: 2x AAA Batteries Dimensions: 80mm x 38mm x 20mm (L x W x D) Product Notes Stopwatch Flashlight - Red LED Light Test Accuracy: .01 BAC (.1g/l) Note: The result of this test gives BAC for reference only

Tester to test DB25 Parallel connections for proper thoroughput. Easy to read pass/fail LED display.

front square, leg and shoulder snaps

100% preshrunk cotton with design printed on the front, 5.6 oz with shoulder-to-shoulder tape with a seamless collar, and double needle construction throughout.